Threaded/Welded Forged Steel Gate Valve
Products Design Features
The main structure features include:
1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling.
2.Co hard alloy welded sealing surface, which is wearing resistant erosion proof, abrasion proof and long-lived.
3.The surface and the adjusting media of the valve shaft are nitrogenized so that it is erosion and abrasion resistant.
4.PN≥15.0MPa(Class900), the middle cavity usea a self-tightening sealing structure to have the sealing performance reinforced along with the pressure rise so as to ensure the sealing performance.
5.There is no backward sealing structure in the valve, so the sealing id reliable
6.The material of the filling and the flange size can be chosen and matched according to the applications and the requirements of the use's. That can satisfies all kinds of working requirements.
Valve test and inspection:
• API 598 & ANSI B16.34
Applicable standards:
• BASIC DESIGN, ANSI B16.34
• SOCKET-WELD (S.W), ANSI B16.11
• SCREWED END (S.E), ANSI B1.20.1
• BUTT-WELD (B.W) ANSI B16.25
Standard material:
• A105.LF2.F5.F11.F22.F304. F304L.F316.F316L
Main Parameter Of The Products
| Serial models | (Hs、Ps)Z11H(Hs、Ps)Z11Y、(Ps)Z41H、(Ps)Z41Y、(Ps)Z441H、(Ps)Z441Y(Ps)Z541H(Ps)Z541Y(Ps)Z941H(Ps)Z941Y | |||
| Pressure grade range | PN1.6-42.0MPa(Class150-2500) | |||
| Drift diameter range | DN15-1000mm(NPS1-40) | |||
| Driving manner | Hand wheel driving | Gear driving and electric driving | ||
| Scope of application | Class150-300(PN1.6-4.0) | Class400-600(PN6.4-10.0) | Class900-2500(PN15.0-42.0) | NPS2-40(DN50-1000mm) |
| NPS1/2-24(DN15-600mm) | NPS1/2-12(DN15~300mm) | NPS1/2-10(DN15~250mm) | ||
Products Performance Specification
Technical Specification
| Structural formation | Bolt(Weld)-jointed bonnet outside stem yoke structure |
| Driving manner | Hand-operated |
| Design standard | API602.BS5352 |
| Face to face | ASME B1.20.1 |
| Flanged ends | ASME B16.11 |
| Test & inspection | API598 BS6755 |
Major Parts Material Form
| No. | Part name | Material |
| 1 | Body | ASTM A105
ASTMA182-F11、F22F5、F9 ASTMA182-F304F316 F321F304LF316L |
| 2 | Seat | ASTM A105
ASTMA182-F11.F22F5F9 ASTMA182-F304、F316.F321F304LF316L |
| 3 | Gate Disc | ASTM A105
ASTMA182-F11F22 F5F9 ASTMA182-F304F316F321 F304LF316L |
| 4 | Stem | ASTM A182F68ASTMA182 F22
ASTM A182-F304F316F321、F304LF316L |
| 5 | Gasket | Graphite&stainless steel |
| 6 | Bonnet | ASTM A105
ASTMA182-F11F22F5F9 ASTMA182-F304F316F321F304LF316L |
| 7 | Bolt | ASTMA193-B7A193-B8A193-B16 |
| 8 | Packing | Graphite |
| 9 | Packing gland | ASTMA216-WCB ASTM A217 WC6 W C5C12 ASTMA351-CF8 CF8MCF8CCF3CF3M |
| 10 | Valve stem nut | Copper alloy |
| 11 | Hand wheel | ASTMA47-32510 ASTMA53660-40-18 |
Related products
-
Flat Gate Valve Parallel Slide valve
Introduction Through conduit valves are widely used for oil and gas pipeline service. This type of valve has such function that, when fully opened, media passage capability superior to valves in use for general secondary process line, it can also be capable for pig ball Cleaning service. BVMC through conduit gate valves are available in Slab Gate and Expanding Gate design and both are fully comply with API 6D standard. ...
-
Flanged Forged Steel Gate Valve
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...
-
Low temperature Gate Valve
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...
-
Knife type Gate Valve Stainless Steel
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...
-
High Temperature and High Pressure Electric Pow...
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...
-
Bolted Bonnet OS&Y Gate Valve
Products Design Features Products design features • Stellited seating surface • Low emission control • Flexible wedge • Full guiding • Absolute bonnet joint leak proof • Optional by-pass design, Y Style Globe Valve, Check Valve. Products Range Size: 2”-24” Rating: ANSI 600lb-2500lb Body material: Carbon steel , Chromium Moly Alloy steel Trim: Per API 600 Operation: Handwheel, Gear, Motor actuator Flanged ends cast steel gate valve are used to ...